Schneider Electric Conext System Control Panel
for XW+ and SW Systems
Monitor and Configure Conext Inverter Charger Systems and Xanbus Enabled Accessories
The Schneider Conext System Control Panel (SCP) eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor the entire Conext XW+ or SW inverter charger system, including Conext MPPT Solar Charge Controllers. Featuring a graphical backlit liquid crystal display, the SCP selectively displays configuration, status and diagnostic information for all devices connected to the XanbusTM network.
| Model | Continuous output | Battery voltage | AC out volts/hertz | No load draw | Charger output | AC surge output |
|---|---|---|---|---|---|---|
| XW4024-120/240-60 | 4000W | 24VDC | 120/240VAC 60Hz | 24W | 150A | 8400W |
| XW+5548NA | 5500W | 48VDC | 120/240VAC 60Hz | 26W | 110A | 9500W |
| XW+6848NA | 6800W | 48VDC | 120/240VAC 60Hz | 28W | 140A | 12000W |
| Model | Description |
|---|---|
| RNW865101501 | XW+ Power Distribution Panel with conduit box for 1 XW inverter |
| RNW865102002 | XW+ Connection kit; needed for 2nd inverter; includes breakers & conduit box |
| RNW865102501 | XW+ empty conduit raceway |
| RNW865101401 | XW+ Power Distribution Panel with conduit box for 1 inverter; no AC breakers |
| RNW865131501 | XW+ 3-phase 120/208 VAC breaker kit |
| RNW865121501 | XW+ split phase 120/240 VAC breaker kit |
| XW-MPPT60-150 | XW 60 A MPPT charge controller with ground fault protection |
| Breaker 60A | Input circuit breaker for MPPT60-150 charge controller |
| Breaker 80A | Output circuit breaker for MPPT60-150 charge controller |
| XW-MPPT80-600 | XW 80 A MPPT charge controller with ground fault protection |
| SQD HU361RB | Input disconnect for MPPT80-600 charge controller; 30A 600VDC 3 pole |
| Breaker 100A | Output circuit breaker for MPPT80-600 charge controller |
Schneider Electric Conext System Control Panel Specifications
[hr]